Javascript is required
[1] European Commission, Being wise with waste: the EU’s approach to waste management, Publications Office of the European Union, Luxembourg, 2010.
[2] Williams, P.T., Waste Treatment and Disposal, John Wiley & Son, Chichester, 2013.
[3] Hultman, J. & Corvellec, H., The European waste hierarchy: from the sociomateriality of waste to a politics of consumption. Environment and Planning, 44(10), pp. 2413–2427, 2012. [Crossref]
[4] European Parliament, Directive 2008/98/EC of The European Parliament and of The Council of 19 November 2008 on waste and repealing certain Directives. Official Journal of the European Union, 2008.
[5] Anastasio, M., The Circular Economy: Practical Steps to Enhance the EU Package. available at http://green-budget.eu/wp-content/uploads/GBECircular-Economy-policybriefing-.pdf (accessed 10 August 2017)
[6] Braun, J.F., EU energy policy under the treaty of Lisbon rules: between a new policy and business as usual. Politics and Institutions (EPIN Working Papers), 31, pp. 8–9, 2011.
[7] Mattoni, B., Gugliermetti, F. & Bisegna, F., A multilevel method to assess and design the renovation and integration of Smart Cities, Sustainable Cities and Society, 15, pp. 105–119, 2015.
[8] European Parliament, Directive 2010/31/EU of the European Parliament and the council on the energy performance of buildings (EPDB), Official Journal of the European Union, pp. 124–146, 2010. [Crossref]
[9] Hernandez, P. & Kenny, P., From net energy to zero energy buildings: defining life cycle zero energy buildings (LC-ZEB). Energy and Buildings, 42, pp. 815–821, 2010. [Crossref]
[10] Roversi R., Cumo F., D’Angelo A., Pennacchia E. & Piras G., Feasibility of municipal waste reuse for building envelopes for near zero energy buildings. WIT Transactions on Ecology and The Environment, 224, pp. 115–125, 2017.
[11] Pennacchia, E., Tiberi, M., Carbonara, E., Astiaso Garcia, D. & Cumo F., Reuse and upcycling of municipal waste for ZEB. Sustainability, 8, p. 610, 2016. [Crossref]
[12] MIUR, Linee guida per le architetture interne delle scuole, 11 April 2013, available at www.hub.miur.pubblica.istruzione.it (accessed 13 August 2017)
[13] Cumo, F., Pennacchia, E., Sferra, A.,Uso, Riuso, Disuso. Criteri e modalità per il riuso dei rifiuti come materiale per l’edilizia, Franco Angeli Edizioni, Roma, pp. 220–221, 2015.
[14] Tabares-Velasco, P.C. & Srebric, J., A heat transfer model for assessment of plant based roofing systems in summer conditions. Building and Environment, 49, pp. 310–323, 2012. [Crossref]
[15] Dall’Osto, M., Beddows, D. C.S., Gietl, J.K., Olatunbosun, O., Xiaoguang Y. & Harrison R.M., Characteristics of tyre dust in polluted air: studies by single particle mass spectrometry (ATOFMS). Atmospheric Environment, 94, pp. 224–230, 2014. [Crossref]
[16] Amato, F., Pandolfi, M., Moreno, T., Furger, M., Pey, J., Alastuey A., Bukowiecki, N., Prevot, A.S.H., Baltensperger, U. & Querol, X., Sources and variability of inhalable road dust particles in three European cities. Atmospheric Environment, 45(37), pp. 6777–6787, 2011. [Crossref]
[17] European Parliament, Directive 2014/24/EU of the European Parliament and of the Council of the 26 February 2014 on public procurement and repealing Directive 2004/18/EC, Official Journal of the European Union, 2004.
[18] Seongchan, K. & Jeong-Han, W., Analysis of the differences in energy simulation results between building information modeling (bim)-based simulation method and the detailed simulation method. Proceedings of the 2011 Winter Simulation Conference,eds. S. Jain, R.R. Creasey, J. Himmelspach, K.P. White & M. Fu, Phoenix, Arizona, pp. 3550–3561, 2011.
[19] Motawa, I. & Carter, K, Sustainable BIM-based Evaluation of Buildings. Procedia – Social and Behavioral Sciences, 74, pp. 419–428, 2013. [Crossref]
[20] Prada-Hernández, A.V., Rojas-Quintero, J. S., Vallejo-Borda, J.A. & Ponz-Tienda, J.L, Interoperability of Building Energy Modeling (Bem) with Building Information Modeling (Bim). Proceedings of Sibragec-Elagec 2015, Sao Carlos, 7–9 October 2015.
[21] Spiridigliozzi, G., La metodologia BIM per una corretta gestione degli impianti, thesis in Construction Engineering and Ambiental Systems, Sapienza Università di Roma, supervisor Grignaffini S., October 2017.
[22] Maile, T., Fischer M. & Bazjanac, V., Building Energy Performance Simulation Tools – a Life-Cycle and Interoperable Perspective (CIFE Working Paper, WP107), Stanford University: Stanford, 2007.
[23] Cemesova, A., Hopfe, C.J. & McLeod, R.S., PassivBIM: enhancing interoperability between BIM and low energy design software. Automation in Construction, 57, pp. 17–32, 2015. [Crossref]
Search

Acadlore takes over the publication of IJEPM from 2025 Vol. 10, No. 3. The preceding volumes were published under a CC BY 4.0 license by the previous owner, and displayed here as agreed between Acadlore and the previous owner. ✯ : This issue/volume is not published by Acadlore.

Open Access
Research article

Experimental envelopes and their integration in the building information modeling energy simulation process

Rossella Roversi1,
Federico Cinquepalmi2,
Fabrizio Cumo3,
Elisa Pennacchia3
1
CITERA Interdepartmental Centre for Territory, Building, Conservation and Environment, Sapienza University of Rome, Italy
2
MIUR Italian Ministry of Education, University and Research, Italy
3
DPDTA Department of Planning Design and Technology of Architecture, Sapienza University of Rome, Italy
International Journal of Energy Production and Management
|
Volume 3, Issue 2, 2018
|
Pages 97-109
Received: N/A,
Revised: N/A,
Accepted: N/A,
Available online: N/A
View Full Article|Download PDF

Abstract:

The present contribution deals with an ongoing italian research which includes several steps and it is approaching to its final stage. the main goal is analysing and testing the feasibility of municipal waste reuse for designing building envelopes for near zero Energy Buildings (nzEB), so as to contribute to the decreasing demand for energy and improve eco-friendly waste management in urban areas. first, prefab building components have been designed using selected waste and their thermal and acoustic behaviours have been calculated, according to the European rules; then the economic costs of the obtained building envelopes have been assessed and compared to common building structures to verify their possible appeal on the italian market, and finally the components have been assembled in the project for a small nzEB building: a didactic classroom for the mira porte primary school (venice, italy).

This paper refers to the in-depth elaboration of the project, mainly concerning fire and pollut- ant protection, and it focuses on the reliability check of the Building information modeling (Bim) parametric model, especially as concerns non-conventional materials and components. the relative building energy behaviour has been obtained exporting the Bim energy simulation model using the Ec770 integrated design for revit plug-in. finally, a comparison between the results obtained with the traditional energy assessment (according to d.m. 26/06/2015) and those using the Bim model has been made to evaluate the interoperability between architectural modeling software and the energy simulation one.

Keywords: BIM, energy behaviour assessment, energy simulation, high performance components, municipal waste reuse, parametric modelling, Zero Energy Buildings
References
[1] European Commission, Being wise with waste: the EU’s approach to waste management, Publications Office of the European Union, Luxembourg, 2010.
[2] Williams, P.T., Waste Treatment and Disposal, John Wiley & Son, Chichester, 2013.
[3] Hultman, J. & Corvellec, H., The European waste hierarchy: from the sociomateriality of waste to a politics of consumption. Environment and Planning, 44(10), pp. 2413–2427, 2012. [Crossref]
[4] European Parliament, Directive 2008/98/EC of The European Parliament and of The Council of 19 November 2008 on waste and repealing certain Directives. Official Journal of the European Union, 2008.
[5] Anastasio, M., The Circular Economy: Practical Steps to Enhance the EU Package. available at http://green-budget.eu/wp-content/uploads/GBECircular-Economy-policybriefing-.pdf (accessed 10 August 2017)
[6] Braun, J.F., EU energy policy under the treaty of Lisbon rules: between a new policy and business as usual. Politics and Institutions (EPIN Working Papers), 31, pp. 8–9, 2011.
[7] Mattoni, B., Gugliermetti, F. & Bisegna, F., A multilevel method to assess and design the renovation and integration of Smart Cities, Sustainable Cities and Society, 15, pp. 105–119, 2015.
[8] European Parliament, Directive 2010/31/EU of the European Parliament and the council on the energy performance of buildings (EPDB), Official Journal of the European Union, pp. 124–146, 2010. [Crossref]
[9] Hernandez, P. & Kenny, P., From net energy to zero energy buildings: defining life cycle zero energy buildings (LC-ZEB). Energy and Buildings, 42, pp. 815–821, 2010. [Crossref]
[10] Roversi R., Cumo F., D’Angelo A., Pennacchia E. & Piras G., Feasibility of municipal waste reuse for building envelopes for near zero energy buildings. WIT Transactions on Ecology and The Environment, 224, pp. 115–125, 2017.
[11] Pennacchia, E., Tiberi, M., Carbonara, E., Astiaso Garcia, D. & Cumo F., Reuse and upcycling of municipal waste for ZEB. Sustainability, 8, p. 610, 2016. [Crossref]
[12] MIUR, Linee guida per le architetture interne delle scuole, 11 April 2013, available at www.hub.miur.pubblica.istruzione.it (accessed 13 August 2017)
[13] Cumo, F., Pennacchia, E., Sferra, A.,Uso, Riuso, Disuso. Criteri e modalità per il riuso dei rifiuti come materiale per l’edilizia, Franco Angeli Edizioni, Roma, pp. 220–221, 2015.
[14] Tabares-Velasco, P.C. & Srebric, J., A heat transfer model for assessment of plant based roofing systems in summer conditions. Building and Environment, 49, pp. 310–323, 2012. [Crossref]
[15] Dall’Osto, M., Beddows, D. C.S., Gietl, J.K., Olatunbosun, O., Xiaoguang Y. & Harrison R.M., Characteristics of tyre dust in polluted air: studies by single particle mass spectrometry (ATOFMS). Atmospheric Environment, 94, pp. 224–230, 2014. [Crossref]
[16] Amato, F., Pandolfi, M., Moreno, T., Furger, M., Pey, J., Alastuey A., Bukowiecki, N., Prevot, A.S.H., Baltensperger, U. & Querol, X., Sources and variability of inhalable road dust particles in three European cities. Atmospheric Environment, 45(37), pp. 6777–6787, 2011. [Crossref]
[17] European Parliament, Directive 2014/24/EU of the European Parliament and of the Council of the 26 February 2014 on public procurement and repealing Directive 2004/18/EC, Official Journal of the European Union, 2004.
[18] Seongchan, K. & Jeong-Han, W., Analysis of the differences in energy simulation results between building information modeling (bim)-based simulation method and the detailed simulation method. Proceedings of the 2011 Winter Simulation Conference,eds. S. Jain, R.R. Creasey, J. Himmelspach, K.P. White & M. Fu, Phoenix, Arizona, pp. 3550–3561, 2011.
[19] Motawa, I. & Carter, K, Sustainable BIM-based Evaluation of Buildings. Procedia – Social and Behavioral Sciences, 74, pp. 419–428, 2013. [Crossref]
[20] Prada-Hernández, A.V., Rojas-Quintero, J. S., Vallejo-Borda, J.A. & Ponz-Tienda, J.L, Interoperability of Building Energy Modeling (Bem) with Building Information Modeling (Bim). Proceedings of Sibragec-Elagec 2015, Sao Carlos, 7–9 October 2015.
[21] Spiridigliozzi, G., La metodologia BIM per una corretta gestione degli impianti, thesis in Construction Engineering and Ambiental Systems, Sapienza Università di Roma, supervisor Grignaffini S., October 2017.
[22] Maile, T., Fischer M. & Bazjanac, V., Building Energy Performance Simulation Tools – a Life-Cycle and Interoperable Perspective (CIFE Working Paper, WP107), Stanford University: Stanford, 2007.
[23] Cemesova, A., Hopfe, C.J. & McLeod, R.S., PassivBIM: enhancing interoperability between BIM and low energy design software. Automation in Construction, 57, pp. 17–32, 2015. [Crossref]
Cite this:
APA Style
IEEE Style
BibTex Style
MLA Style
Chicago Style
GB-T-7714-2015
Rossella Roversi, Federico Cinquepalmi, Fabrizio Cumo, & Elisa Pennacchia (2018). Experimental envelopes and their integration in the building information modeling energy simulation process. Int. J. Energy Prod. Manag., 3(2), 97-109. https://doi.org/10.2495/EQ-V3-N2-97-109
Rossella Roversi, Federico Cinquepalmi, Fabrizio Cumo, and Elisa Pennacchia, "Experimental envelopes and their integration in the building information modeling energy simulation process," Int. J. Energy Prod. Manag., vol. 3, no. 2, pp. 97-109, 2018. https://doi.org/10.2495/EQ-V3-N2-97-109
@research-article{Roversi2018ExperimentalEA,
title={Experimental envelopes and their integration in the building information modeling energy simulation process},
author={Rossella Roversi and Federico Cinquepalmi and Fabrizio Cumo and Elisa Pennacchia},
journal={International Journal of Energy Production and Management},
year={2018},
page={97-109},
doi={https://doi.org/10.2495/EQ-V3-N2-97-109}
}
Rossella Roversi, et al. "Experimental envelopes and their integration in the building information modeling energy simulation process." International Journal of Energy Production and Management, v 3, pp 97-109. doi: https://doi.org/10.2495/EQ-V3-N2-97-109
Rossella Roversi, Federico Cinquepalmi, Fabrizio Cumo and Elisa Pennacchia. "Experimental envelopes and their integration in the building information modeling energy simulation process." International Journal of Energy Production and Management, 3, (2018): 97-109. doi: https://doi.org/10.2495/EQ-V3-N2-97-109
Rossella Roversi， Federico Cinquepalmi， Fabrizio Cumo， et al. Experimental envelopes and their integration in the building information modeling energy simulation process[J]. International Journal of Energy Production and Management， 2018， 3(2)： 97-109. https://doi.org/10.2495/EQ-V3-N2-97-109