Javascript is required
[1] Pepper, D.K., Kassab, A.J. & Divo, E., An Introduction to Finite Element, Boundary Element, and Meshless Methods with Applications to Heat Transfer and Fluid Flow, ASME Press, 2014. [Crossref]
[2] Idelsohn, S. & Oñate, E., To mesh or not to mesh. that is the question… Computer Methods in Applied Mechanics and Engineering, 195(37–40), pp. 4681–4696, 2006. [Crossref]
[3] Divo, E. & Kassab, A.J., An efficient localized radial basis function Meshless method for fluid flow and conjugate heat transfer. Journal of Heat Transfer, 129(2), pp. 124–136, 2007. [Crossref]
[4] Li, S. & Liu, W.K., Meshfree and particle methods and their applications. Applied Mechanics Review, 55(1), pp. 1–34, 2002. [Crossref]
[5] Kelly, J.M., Divo, E.A. & Kassab, A.J., A GPU-accelerated meshless method for two-phase incompressible fluid flows. Engineering Analysis with Boundary Elements, 40, pp. 36–49, 2014. [Crossref]
[6] Divo, E. & Kassab, A.J., Localized meshless modeling of natural convective flows. Numerical Heat Transfer, Part B: Fundamentals, 53, pp. 487–509, 2008. [Crossref]
[7] Partridge, P.W., Brebbia, C.A. & Wrobel, L.C., The Dual Reciprocity Boundary Ele-ment Method, Boston: Computational Mechanics, 1992.
[8] Divo, E. & Kassab, A.J, Transient Non-linear Heat Conduction Solution by a Dual Reciprocity Boundary. ASME International Mechanical Engineering Congress and Exposition, Heat Transfer, 1, 2014.
[9] Wrobel, L.C., Brebbia, C.A., The dual reciprocity boundary element formulation for nonlinear diffusion problems. Computer Methods in Applied Mechanics and Engineer-ing, 65(2), pp. 147–164, 1987. [Crossref]
Search

Acadlore takes over the publication of IJCMEM from 2025 Vol. 13, No. 3. The preceding volumes were published under a CC BY 4.0 license by the previous owner, and displayed here as agreed between Acadlore and the previous owner. ✯ : This issue/volume is not published by Acadlore.

Open Access
Research article

A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows

leonardo a. bueno1,
eduardo a. divo1,
alain j. kassab2
1
Department of Mechanical Engineering, Embry-Riddle Aeronautical University, Daytona Beach, FL, USA
2
Department of Mechanical and Aerospace Engineering University of Central Florida, Orlando, FL, USA
International Journal of Computational Methods and Experimental Measurements
|
Volume 5, Issue 3, 2017
|
Pages 359-368
Received: N/A,
Revised: N/A,
Accepted: N/A,
Available online: N/A
View Full Article|Download PDF

Abstract:

Velocity-pressure coupling schemes for the solution of incompressible fluid flow problems in Computational Fluid Dynamics (CFD) rely on the formulation of Poisson-like equations through projection methods. The solution of these Poisson-like equations represent the pressure correction and the velocity correction to ensure proper satisfaction of the conservation of mass equation at each step of a time-marching scheme or at each level of an iteration process. Inaccurate solutions of these Poisson-like equations result in meaningless instantaneous or intermediate approximations that do not represent the proper time-accurate behavior of the flow. The fact that these equations must be solved to convergence at every step of the overall solution process introduces a major bottleneck for the efficiency of the method. We present a formulation that achieves high levels of accuracy and efficiency by properly solving the Poisson equations at each step of the solution process by formulating a Localized RBF Collocation Meshless Method (LRC-MM) solution approach for the approxima- tion of the diffusive and convective derivatives while employing the same framework to implement a Dual-Reciprocity Boundary Element Method (DR-BEM) for the solution of the ensuing Poisson equations. The same boundary discretization and point distribution employed in the LRC-MM is used for the DR-BEM. The methodology is implemented and tested in the solution of a backward- facing step problem.

Keywords: dual reciprocity boundary element method, incompressible fluid flows, meshless methods, radial basis functions

References
[1] Pepper, D.K., Kassab, A.J. & Divo, E., An Introduction to Finite Element, Boundary Element, and Meshless Methods with Applications to Heat Transfer and Fluid Flow, ASME Press, 2014. [Crossref]
[2] Idelsohn, S. & Oñate, E., To mesh or not to mesh. that is the question… Computer Methods in Applied Mechanics and Engineering, 195(37–40), pp. 4681–4696, 2006. [Crossref]
[3] Divo, E. & Kassab, A.J., An efficient localized radial basis function Meshless method for fluid flow and conjugate heat transfer. Journal of Heat Transfer, 129(2), pp. 124–136, 2007. [Crossref]
[4] Li, S. & Liu, W.K., Meshfree and particle methods and their applications. Applied Mechanics Review, 55(1), pp. 1–34, 2002. [Crossref]
[5] Kelly, J.M., Divo, E.A. & Kassab, A.J., A GPU-accelerated meshless method for two-phase incompressible fluid flows. Engineering Analysis with Boundary Elements, 40, pp. 36–49, 2014. [Crossref]
[6] Divo, E. & Kassab, A.J., Localized meshless modeling of natural convective flows. Numerical Heat Transfer, Part B: Fundamentals, 53, pp. 487–509, 2008. [Crossref]
[7] Partridge, P.W., Brebbia, C.A. & Wrobel, L.C., The Dual Reciprocity Boundary Ele-ment Method, Boston: Computational Mechanics, 1992.
[8] Divo, E. & Kassab, A.J, Transient Non-linear Heat Conduction Solution by a Dual Reciprocity Boundary. ASME International Mechanical Engineering Congress and Exposition, Heat Transfer, 1, 2014.
[9] Wrobel, L.C., Brebbia, C.A., The dual reciprocity boundary element formulation for nonlinear diffusion problems. Computer Methods in Applied Mechanics and Engineer-ing, 65(2), pp. 147–164, 1987. [Crossref]

Cite this:
APA Style
IEEE Style
BibTex Style
MLA Style
Chicago Style
GB-T-7714-2015
Bueno, L. A., Divo, E. A., & Kassab, A. J. (2017). A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows. Int. J. Comput. Methods Exp. Meas., 5(3), 359-368. https://doi.org/10.2495/CMEM-V5-N3-359-368
L. A. Bueno, E. A. Divo, and A. J. Kassab, "A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows," Int. J. Comput. Methods Exp. Meas., vol. 5, no. 3, pp. 359-368, 2017. https://doi.org/10.2495/CMEM-V5-N3-359-368
@research-article{Bueno2017ACL,
title={A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows},
author={Leonardo A. Bueno and Eduardo A. Divo and Alain J. Kassab},
journal={International Journal of Computational Methods and Experimental Measurements},
year={2017},
page={359-368},
doi={https://doi.org/10.2495/CMEM-V5-N3-359-368}
}
Leonardo A. Bueno, et al. "A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows." International Journal of Computational Methods and Experimental Measurements, v 5, pp 359-368. doi: https://doi.org/10.2495/CMEM-V5-N3-359-368
Leonardo A. Bueno, Eduardo A. Divo and Alain J. Kassab. "A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows." International Journal of Computational Methods and Experimental Measurements, 5, (2017): 359-368. doi: https://doi.org/10.2495/CMEM-V5-N3-359-368
Bueno L. A., Divo E. A., Kassab A. J.. A Coupled Localized RBF Meshless/Drbem Formulation for Accurate Modeling of Incompressible Fluid Flows[J]. International Journal of Computational Methods and Experimental Measurements, 2017, 5(3): 359-368. https://doi.org/10.2495/CMEM-V5-N3-359-368