Acadlore takes over the publication of IJCMEM from 2025 Vol. 13, No. 3. The preceding volumes were published under a CC BY 4.0 license by the previous owner, and displayed here as agreed between Acadlore and the previous owner. ✯ : This issue/volume is not published by Acadlore.
Suppression of Flow-Induced Vibrations Using Ribbon Fairings
Abstract:
An experimental study was conducted to investigate the ability of ribbon fairings to suppress flow-induced vibrations on a long flexible horizontal cylinder. The test matrix included towing the cylinder at various speeds, towing the cylinder in regular waves, and investigating the influence of partial coverage on the response behavior. The test cylinder was 29 m long with a length to diameter (L/D) ratio of ~760. Interior to the tensioned cylinder model were six sets of unequally spaced biaxial accelerometers in a lightly pressurized environment keeping the interior dry. A string potentiometer was externally attached at the center of the model to provide a reference for later displacement estimates based on integration of the acceleration data. The time domain decomposition method (TDD) was used to recover mode shapes, damping characteristics, and modal contribution factors. For the uniform current cases, the findings illustrate that ribbon fairings are effective and provide increased damping when compared with bare cylinders. Partial coverage demonstrates that localized suppression becomes increasingly less effective as the percentage coverage is reduced. The introduction of regular waves to the towed cylinder cases illustrates the ineffectiveness of ribbon fairing to suppress the orbital motions induced by the waves, which is preferable to the amplification typically observed for airfoil fairings.
